Do Moen shower valves have flow restrictors?

How to Remove a Flow Restrictor from a Moen Shower Head
  1. Step 1: Take Out the Shower Head. Wrap the showerhead with a clean rag and tighten the jaws with an adjustable wrench.
  2. Step 2: Disassemble the Fitting.
  3. Step 3: Find the Flow Restrictor.
  4. Step 4: Take Out the Flow Restrictor.
  5. Step 5: Reassemble the Parts.

Click to see full answer

Just so, do Moen shower heads have flow restrictors?

All manufacturers, including Moen, now place flow restrictors in the neck of the shower head to help conserve water. To eliminate the low-water pressure problem requires removing the flow restrictor from the Moen shower head.

Furthermore, how can I increase shower pressure? How to increase water pressure in your shower

  1. Clean the shower head.
  2. Check for a flow restrictor.
  3. Check for kinks.
  4. Check that the valve is fully open.
  5. Check for leaks.
  6. Open the water heater shut-off valve.
  7. Flush the water heater.
  8. Buy a low-pressure shower head.

Then, how do you remove a flow restrictor from a shower?

Take care not to damage the gasket as you do so. Remove the flow restrictor, which is a plastic disc that covers the shower head inlet located behind a star-shaped metal piece in the shower head. Hook the paper clip under one section of the flow restrictor and twist it to pry up and remove the flow restrictor.

How do you remove a water flow restrictor?

Insert the screwdriver into the pipe end of the showerhead. Press the tool on one edge of the plastic water restrictor. Place the tool under the flow restrictor and pull gently to remove it from the opening.